• Close mounting – 7/8” on center
• Overall height less than 1”
• Easy to mount on manifold with two #4-40 screws
• Geometric design
• Polymer housing – Zytel ST 801® super tough
• TE Connectivity-style pin connection or 18” wire leads
• Flow up to 17 l/min (0.6 scfm)
As in the case of the EV/EVO product, the ES/ESO uses the single moving part design proven many times in the EV/ET/EC series valves. Of course, given the reduced size of the coil the power to operate increases to 1 watt.
Because of its reliability, the ES/ESO series valve is found in many of the same applications and industries as its predecessor, the EV/ET/EC. However, the smaller size finds it used more commonly in portable or mobile equipment. This makes the valve particularly applicable in home healthcare applications.
Valves are small in size with a variety of coil voltages and flow options. Mounting is as close as 7/8” on center. Housing is molded Zytel® ST 801 for toughness and rigidity. Valves feature low power, cool running, quiet operation and fast response time. They convert low voltage, low current signals into high pressure pneumatic outputs. ESO and similar styles have top hose barb or #10-32 threaded fitting for N.C. exhaust or N.O. inlet.
Coils are available to mate with TE Connectivity #5-103956-2 with connector or with 18” wire leads which utilize #26 wire. Clippard ES valves are unique, with only one internal moving part that travels a mere 0.007”.